Productos y aplicaciones de máquina herramienta, CNC, DRO, captación, medición, motion control y energía fotovoltaica.

It is the easiest-to-operate small CNC for its features. It adapts perfectly to standard analog applications.

It has been designed to make the operator's job easier. It offers an interactive canned cycle editor, Teach-in, tool inspection, etc. It is programmed in ISO code and its screen offers the operator all the necessary information: axis position and feedrate, spindle speed, selected tool, etc.

Great memory capacity
It has a 256 KB RAM memory for editing and executing part-programs and it may be expanded up to 1 MB. It also has a 128 MB compact flash memory for storing user programs, the CNC configuration and the PLC program.

USB connector
The USB connector may be used to upload and download part-programs, tables and parameters from/to an external memory device.

Interactive editor for canned cycles
It is a dialog-based guided editing method. The CNC guides the operator through the help screens that request the data for the selected operation. No expert ISO programming knowledge is required, just the basics.

The quality of the generated programs is excellent. This editing method only allows you enter the requested data, hence making it impossible to generate wrong or incomplete blocks.

Tool Inspection
Tool inspection makes the operator's job easier allowing him to move the axes after interrupting the program, e.g. to check the tool status, replace it if necessary and resume the program after repositioning the axes.

The new selected tool needs not be identical to the previous one; if another tool of different characteristics is selected, the CNC recalculates the next machining operation according to the new tool.

Likewise, activating the MDI mode during tool inspection and executing any M, S or T function makes it possible to adapt the machining functions to the new tool.

Thread cutting operations
On lathe models, besides the typical turning operations (turning, grooving, facing, etc.), it is possible to make all kinds of threads: longitudinal, taper, on the face, with variable pitch, etc. Multiple-entry (multi-start) threads can also be defined.

The thread repair function offered by the 8035 CNC is ideal for repairing worn out threads.