Productos y aplicaciones de máquina herramienta, CNC, DRO, captación, medición, motion control y energía fotovoltaica.

 

 

Easy to operate. It may be programmed in ISO code or in conversational mode making it the ideal CNC for large production lines and applications for unitary parts.

 

Ideal for large production lines and applications for unitary parts.

 

The 8055 CNC can govern up to 7 axes and 2 spindles. Block processing time of 1.5 ms may be obtained with it, it analyzes the tool path 75 blocks in advance (look ahead) and it allows smoothening the tool path by applying the right acceleration control (Jerk control).

 

The continuous evolution of the 8055 CNC family contributes to the productivity increase, improving the efficiency of the machines in sectors requiring a robust, versatile and easy-to-install CNC system.

 

This CNC is widely present in applications of large production lines as well as in applications for unitary parts in a shop because the operator can use at any time either the ISO programming system or the Fagor conversational programming system.

 

Fagor CNC's are user friendly and permit editing a program while executing another one. They have a profile editor with graphic support to draw contours by entering known measurements off the blue-print.

 

Controlling position, velocity, accelerations and collisions prevents undesired machining and help achieve unmatched part-finish and maximum performance of the machine.

 

Tool inspection makes the operator's job easier allowing him, after interrupting the program, to check the tool status, replace it if necessary and resume the program after repositioning the axes.

 

Editing and Simulation
The capability of editing part-programs while executing another program reduces waiting time between parts. Likewise, simulating the program graphically before machining the part permits verifying each operation and correct the data entered.

 

Home search
After turning the machine on, there is no need to move the axes to the reference point (home). Using Fagor distance-coded feedback systems, the CNC assumes the new position by simply moving the axes 50 mm; with Fagor absolute feedback systems, there is no need to move the axes.

 

Possibility of production estimate
The simulation permits checking programs by graphically showing its execution. It also makes an estimate of the total execution time and of the machining time for each tool.

 

Intelligent Profile Editor
Blueprints not always show the coordinates of the starting and end points of each section. Sometimes it suffices to just indicate the inclination angle of a section and other times, it is enough to indicate that it is tangent to the previous section.

 

With the Intelligent Profile Editor no calculations are required, just enter the known data into the CNC. When there are more than one solution, all possible solutions are shown graphically so the operator can select the right one.

 

Improved Production Process
The Ethernet connection helps improve the production process by transmitting part-programs, previously created in the Programming Office, to the CNC for their execution.

 

It is also possible to monitor the machining time for statistical calculation, dead time, usage of each tool, etc.

 

Telediagnosis and telemaintenance
It makes the technician's job easier since from his work table and at his own PC he can remotely manipulate and observe the status of the machine (CNC-drives-motors).

 

It means significant savings in travel expenses and, technical assistance labor because it reduces machine downtime by getting help and error diagnosis immediately.

 

CNC 8055 MCO and CNC 8055 TCO, open conversational models
Fagor open conversational CNC's may be adapted to any application. Using PC-based tools, they may be used to create cycles tailored to the OEM and to the characteristics of the application.

 

They are especially indicated for the following applications: Surface and cylindrical grinders, sharpeners, deforming machines (pipe bending, punches, etc.), woodwork applications, etc.