Standard range incremental linear encoders – MM Series

Incremental linear encoder - MM/MM2 series

Designed for applications on standard machines with travels up to 520 mm.

With reference marks every 50 mm and detachable cable connector built into the reader head (except the MMK series where the reader head comes standard with a 3-meter attached cable). With very small profile, 5 mm less than the M series they are ideal for tight spaces.

Measuring lengths in millimeters:
40 (*) • 70 (*) • 120 • 140 • 170 • 220 • 270 • 320 • 370 • 420 • 470 • 520
(*) On MMT and MMX models

General specification:
Measurement By means of graduated glass scale, with 20 μm etching pitch
Maximum speed 60 m/min
Maximum vibration 3 g
Moving thrust < 5 N
Operating temperature 0 ºC … 50 ºC
Storage temperature -20 ºC ... 70 ºC
Weight 0,58 kg + 0,5 kg/m
Relative humidity 20 … 80%
Protection IP 53 (standard)
IP 64 (DIN 40050) using pressurized air in linear encoders at 0.8 ± 0.2 bar
Reader head  With detachable cable connector
(except MMKT and MMKX)
Specific characteristics:
MMT
MMOT
MMKT MM2X
MM2OX
MMKX M2P
MM2OP
Accuracy ± 10 μm ± 5 μm ± 10 μm ± 5 μm
Resolution 5 μm 1 μm 0,1 μm
Reference marks I0 MMKT y MMKX: I0 every 50 mm
MMT, M2TD, M2X y M2P: I0 every 50 mm
MMOT, MM2OX, MM2OP: Io codificado
Output signals salida-TTL-diferencial TTL salida-TTL-diferencial TTL differential onda-senoidal  1 Vpp
T period of output signals 20 μm 4 μm 20 μm
Limit frequency 50 KHz 250 KHz 50 KHz
Maximum cable length 20 m 50 m 150 m
Supply voltage 5 V ± 5%,100 mA (without load) 5 V ± 10%, < 100 mA (without load)

MM/MM2 model:

MMK model:

Order identification:
Example for an incremental encoder : MMT-27
MM/MM2 T 27
Type of profile:
MM/MM2: for very limited space 
Type of signal:
• T: 5 μm resolution TTL
• X: 1 μm resolution differential TTL
• P: 1 Vpp sinusoidal
Measuring lengths in cm:
In the example
(27) = 27 cm = 270 mm