ES EN DE

Quercus

Powerful. Compact. Smart.

All inclusive. The next generation transformational technology that leaves everything else behind. This new system that comes stacked with host of outstanding new features.

Watch video

Fagor Automation presents QUERCUS, a CNC Automation System, at your fingertips. This is a combination of decades of our knowledge and experience in machine tool sector, together with, technological advancements of the future. QUERCUS will completely TRANSFORM your overall CNC and automation experience. The advantages of the QUERCUS system:

CNC with improved and agile control algorithms and very compact hardware.
Redesigned servo drives and power supplies, with revamped power and control
circuits using the most technologically advanced electronics.
Inclusion of the latest servo bus, Sercos III, using Industrial Ethernet technology
at super-fast 100 MBd.

Simplification of the DC bus connections to facilitate quick assembly.
Standardization of nomenclature and connectors for all products.
Introduction of new features for auto configuration, tuning and diagnosis
resulting in streamlined and efficient installation.

QUERCUS incorporates all of the current market’s requirements while also being built to integrate future enhancements. This system will allow our customers continued growth and access to all of Fagor Automation’s future developments.

01. Advance Technology

Complete redesign

More powerful control algorithms and circuits with the latest technology

Even more compact

Easier and more
efficient assembly

More powerful algorithms

Technological innovations

Improved CPU

The complete new design of our CNCs incorporating CPU’s with improved and expandable features (such as higher speed of processing, more memory capacity, etc.) in all models, provides support for more powerful and AGILE control algorithms and reinforces an architecture of innovative and flexible system.

We have completely revitalized our CNCs and created a very compact hardware platform.

We have also taken into account all aspects of assembly. It is now easier, safer and more efficient: the power buses (24 V DC BUS) are protected by an easy-to-open cover plate.

The DC BUS connections for Servo Drives are made using easy-to-install plates included as accessories

All the drives and power supplies have been redesigned using state-of-the-art electronic components, saving substantial space for both the new power circuits and the control electronics.

This means more power with smaller modules, which, in turn, means reduced space requirements inside a machine’s electrical cabinet.

02. Ethernet

New Sercos III Servo Bus

Back to simplicity
Easier-to-use Industrial Ethernet-based connections

Fagor Automation introduces a new servo communication bus between the CNC and the drive modules. The Industrial Ethernet-based Sercos III bus means- speeds of up to 100 MBd can be achieved.

With ultra-fast communication bus, the CNC can receive and manage a lot more information sent by the servo and spindle axes and centralize the information management. Consequently, the system’s configuration is even more automated, since it detects any connected modules (auto detection), such as servo drives, motors, feedback devices like linear encoders etc.

This centralization of information also allows for:

• Remote version updates including new feature enhancements for connected modules.

• Improvements to diagnostics and the access to all the element variables of the system using the built-in CNC Oscilloscope, from the servo drives to feedback and motor variables.

• Faster integration and better management of functions that depend on more than one axis (Tandem, Synchronism etc.).

And all of this has been achieved with a significant simplification of the cabling system, with replacement of optical fiber with easier to install STP Ethernet cables (Shielded Twisted Pair).

Industrial Ethernet Connection

Easy Connection

Centralization of Information

Higher Frequency

Bus Speed

100MBd

03. Full Digital

We talk digital…

…and we can speak with everyone. Serial encoder-ready

Feedback inputs are developed for real-time SSI, EnDat and FeeDat serial communication protocols. This represents a totally digital system, from command to all the way to feedback, since all the involved modules communicate via digital protocols, hence resulting in huge improvements in the control data flow and a greater immunity to noise, etc.

These feedback inputs are standardized for all the elements connected to the control bus, both for the CNC and the servo drives, and includes regenerative power supplies when used. The improved new connectors are smaller, more secure and compact.

Compatibility and integration

Fully
digital

04. Even smaller

Both for CNCs…

…to create an extremely compact platform

Reduction of around 45% to 60% (depending on model) in size compared to the previous CNC platform.

And for drive modules...

...with single and double modules
to save cabinet space

Now, a unique servo drive module is capable of controlling 2 axes.

45%

Reduction for integrated CNCs

60%

Reduction for modular CNCs

Servo drives rated from 7 to 275 A, with maximum current increase in some sizes, and with the option of having double axes with a single 77 mm module, with 7+7/12+12/21+21 A.
Only 77 mm wide, for non-regenerative power supplies rated up to 45 kW.
Important reductions in size for regenerative sources, with 30 and 40 kW in only 155 mm and 60 and 80 kW in only233 mm.
Reduction to just 39 mm for some auxiliary modules.

05. Mechanically Compatible Central Unit

...for the entire family of CNCs

Provides maximum flexibility when designing the machine control panels. A wide variety of monitors and panels are available for any integrated CNC from the 8060/8065/8070 family.

As the central unit is MECHANICALLY COMPATIBLE for the whole CNC family, this control console can be similar for different machine types, regardless of the CNC model.

Integrated CPU for models 8060 / 8065 / 8070

MayorGreater flexibility for CNC configurations
with an integrated monitor

06. VESA mount

New installation system for modular CNC

When using the simple VESA mount adapter, a CNC can be connected directly to monitors of various sizes.

We have a new universally acceptable assembly arrangement to attach a modular CNC directly to a Fagor or a third-party monitor. This allows various new possibilities for machine manufacturers for their control cabinet design. This unique and new installation method provides an alternative to cabinet assembly. Its small size and a thickness of only 36.5 mm, means a very sleek control panel or cabinet

icono acotación 36,5mm

thick

07. Web technology-based HMI

Easy to program and portability to other platforms

Web technology

Windows

Linux

Android

iOS

Responsive

The technology allows a single web design to display everything correctly on any portable device

New revitalized multiplatform HMI, based on HTML technology that is modern looking and simplified. The HTML-based software allows for the screen format and aesthetics to be modified and customized in a simplified manner. The redesigned user screens enhance appearance and make them more intuitive and user friendly.

Adaptable to all screen formats, from wide format panoramic to compact screens.

Remote and portable device connections are possible. The remote connection allows immediate and easy access for diagnosis or monitoring of unattended machine, for data collection and analysis purposes including troubleshooting.

The web-based technology HMI multiplatform means easier customizations and with a single development can visualize the screens on all types of platforms, such as Windows, Android, IOS, Linux, etc.

08. Always Ready for the future

QUERCUS is the CNC automation system that can help you grow vertically and allows you to be always prepared for most demanding requirements of the current and future markets.

QUERCUS means YOU will always stay in tune with Fagor Automation’s latest technological advancements,innovations and developments.

Request information